Aussiechick 110 November 3, 2024 3 of 3 members found this review helpful 3 / 3 members This download turned out to be a lot of work. Which is a shame as I REALLY love the design , just the attention to detail and execution of build flow went missing somewhere along the way. That being said if you are willing to put in some time and effort fixing things, this is am amazing looking sail boat / yacht Problems that need addressing as follows: the back stairs to enter the main deck and exit it are to high to get up. I just put the whole yacht in the air, ungrouped everything , copied and added more :) ps. you have to move the steering wheel and compass to do this. Same problem with the side stairs that lead to the side walking area of EITHER side of the yacht. Same fix applies When you do eventually get into the yacht and up the side stairs to the sidewalk, you are hit with another issue. You can not get past the wire going from the floor ALL the way up to the top mast. which means moving BOTH sides of the yachts wires out as far as they can go (floor level) and then everywhere they connect out too. I added in more side railing and fixed up a few easy errors with the original railing. Then we get too the top of the roof on the bedroom cabin and the place you lay on top. It was just a patchwork of pieces put together to fill holes, bits sticking up , jions not seamless, beams not looking the same. So as stated it is NOT a download and do nothing unless you don't care? Once you have fixed everything you will end up with a very nice looking Yacht. I really do love it, the colours are spot on and the idea behind the style layout is eye candy (for me anyway). I added deck chairs and made a little table to the front and a blue pad and chair pose overlay to the bow. Response from the author: Hello, thank you for downloading this project. From what you describe it seems that there was either a problem with the downloaded file or that you performed a rotation in "Pivot" mode and not in Center which has the effect of destabilizing the assembly. I think you should try to load the object alone outside your site to check if the file has the same defects.